Quench water regulation at coking plant in Schwelgern

Quench water regulation at coking plant

Country: Germany
Customer: KBS Kokereibetriebsgesellschaft Schwelgern GmbH
Products: VAG RIKO® Plunger Valves

VAG values in continuous operation to quench red-hot coke. The construction of the new coking plant in Schwelgern marked a special milestone for the steel-making environs of Duisburg. After a construction time of three years, the biggest, most modern, and one of the cleanest coking plants in the world had been completed.

VAG's Plunger Valves are used in the modern, low-emission coke stabilizing quenching process, which replaces the conventional wet quenching process. The construction of the new, modern coking plant in Schwelgern set new standards for size, capacity and environmental protection. The new plant's predecessor, coking plant August Thyssen, was decommissioned in 2003.

Two batteries, each equipped with 70 coke ovens (the largest in the world), produce 2.5 million tons of coke a year solely for the production of steel at ThyssenKrupp Steel AG. The quenching tower, at the foot of which the VAG valves are installed. After a cooking time of 25 hours, the red-hot coking coal is pushed out of the oven in the waiting quench car. The quench car positions the coke under the quenching tower, where it is quenched in 70 seconds with over 100 m3 of quench water. This process is repeated every 10 minutes, or 135 times a day, 7 days a week, the whole year round.

Very high demands on the valves

This extreme stress, and the 60°C temperature of the quench water, put very high demands on the valves. The previously used butterfly valves were neither capable of withstanding abrasion and cavitation, nor did they fulfil the required control tasks. Their closing times were also too long. Operations were occasionally interrupted. KBS Kokereibetriebsgesellschaft Schwelgern called upon Schwietzke Armaturen, which is renowned for its expertise in this area. Their process-oriented advice and their strong recommendation to use VAG Plunger Valves enabled all of the problems to be solved.

VAG's Plunger Valves in the nominal dimensions DN 300 and DN 500 were deemed to be the most suitable for this task because of their excellent cavitation behaviour. Eight of these valves were needed. As a customisation, the valves were equipped with inner parts made of stainless steel 1.4313. This, and the shape that was especially adapted for this process, means that there is very little abrasion, even in continuous operation.

VAG's RIKO® Plunger Valve - the ideal valve for such extreme stress

'The plant has been running continuously and without failure since it was put into operation in September 2005. Our customer, KBS Kokereibetriebsgesellschaft Schwelgern, and we, as a consulting company and wholesaler, are extremely satisfied. The quality and the functionality of VAG's RIKO® Plunger Valve make it the ideal valve for such extreme stress.' 'Even after 22,000 continuous hours of operation, the abrasion is so minimal that the valves could be put back into operation without maintenance,' boasts Artur Güttler, Technical Manager at Schwietzke Armaturen. 'The adapted shape of VAG's plunger valves makes them less susceptible to abrasion'.

The unit, which is now equipped with a convenient control, has been running smoothly and reliably since July 2008. The experience in Adelsdorf and in Wintersdorf in 2004 was so good that the next project is already being planned. The Dillenberg Group wants to work in the same way with VAG and Festo on the upcoming renovation of the Gonnersdorf waterworks.

Back to Overview

Additional information:
  • Quench water regulation at coking plant in Schwelgern, Germany

Carl-Reuther-Str. 1
68305 Mannheim
Phone: +49 (621) 749 0
Fax: +49 (621) 749 2156

Write e-mail


In order to use all functions and advantages of the site, you need a user account.

Register now / Login