VAG RIKO® Plunger Valve one-piece body, with electric actuator

PN: 10/16/25/40 - DN: 150...2200

Productgroup: Control Valves

Medium: Water

Externally controlled control valve with annular flow cross-section for the continuous regulation of high pressure differences and flow rates. Long service life as the bearings do not come into contact with the medium. Wear-resistant, corrosion- and infiltration-proof guide rails due to hard-facing. This ensures low operating forces and prevents jamming of the piston. Suitable for use in water treatment, water distribution, in dams, power plants, industry and in pressure management.

Contact

VAG Valves (India) Private Limited

Plot No. 57 & 56 Phase-III, TSIIC Pashamylaram Patancheru (M) Sangareddy (D) – 502307

Telangana, India Phone: +91 91000 54249

Write e-mail

Questions about the product?

Our experts will gladly answer your questions and support you competently and reliably!

Find contact

My VAG

In order to use all functions and advantages of the site, you need a user account.

Register now / Login

  • Control valve in straightway type
  • With customized control device depending on operating conditions
  • Low actuating torque due to pressure balanced valve piston
  • Rotationally symmetrical flow guidance
  • Annular flow cross section in each position
  • Axial movement of the plunger by means of crank gear mechanism
  • With self-locking worm gear unit including position indicator
  • With electric actuator
  • Elastic profile sealing ring located in the no-flow zone for high durability
  • Wear-resistant, corrosion-resistant and infiltration-proof piston guides in the body by micro-finished bronze weld overlay
  • With flange ends on both sides acc. to EN 1092-2
  • Face-to-face length: acc. to EN 558, basic series 15 - from DN 500 1.5 x DN
  • Inner parts: Stainless steel (exception: > DN 600 crank gear from EN-GJS-400-15 (GGG-40))
  • Valve sealing: EPDM
  • Piston: Stainless steel 1.4301
  • Body: Ductile iron EN-GJS-400-15 (GGG-40)
  • Bearing bush: Bronze
  • Eye bolts for lifting: Galvanized steel 1.0401 (C15)
  • Internally and externally epoxy coated
Additional information: