VAG GA Lever & Spring Swing Check Valve Figure 231-DS, 232-DS Increasing Size

See Data Sheet for sizes

Productgroup: Non-Return (Check) Valves

Medium: Water,  Wastewater

VAG/GA Industries Figures 231-DS and 232-DS are heavy duty, customizable swing check valves that utilize an adjustable spring assisted closure to minimize slam and hammer. In addition, the valve’s outlet connection is expanded one or two sizes larger than the inlet connection which can eliminate the need for an increaser fitting on the pump discharge.

Normally installed in the discharge of a pump to prevent backflow when the pump is off line, it opens smoothly at pump start and closes quickly and quietly upon pump shutdown.

Figures 231-DS and 232-DS meet the design, materials of construction and testing required by AWWA C508 and is suitable for use with water or sewage.

• Heavy duty construction withstands rigors of pump station operation
• Expanded outlet connection can eliminate need for increaser fitting
• Full flow area when swung only 25° away from seat for low head loss and reduced pumping cost
• Replaceable rubber disc seat for tight seating at low and high pressure
• Lever & spring field convertible right hand to left hand side, and from horizontal to vertical installation

• Body & Disc: Cast Iron, ASTM A126 Class B
• Cover: Steel, ASTM A36
• Body Seat: Stainless Steel, Type 316
• Disc Seat: Buna-N
• Hinge Shaft: Stainless Steel, Type 303
• External Fasteners: Steel, A307, Zinc Plated
• Spring: Steel

Uncoated Internal, Enamel Primer
External

Contact

VAG-Group
Headquarters
Carl-Reuther-Str. 1
68305 Mannheim
Germany
Phone: +49 (621) 749 0
Fax: +49 (621) 749 2156

Write e-mail

Questions about the product?

Our experts will gladly answer your questions and support you competently and reliably!

Find contact

My VAG

In order to use all functions and advantages of the site, you need a user account.

Register now / Login