VAG EKN® Hydropower Butterfly Valve Turbine inlet valve

PN: 6/10/16/25 - DN: 150...4000

Productgroup: Butterfly Valves

Medium: Water

Special butterfly valve, particularly suitable as turbine inlet valve. Customised double-eccentric design. For operation with hydraulic brake-and-lift unit. Low flow resistance and suitable for very high flow velocities.

  • Sealing system/standard: Resilient seated in accordance with EN 593
  • Face-to-face length: acc. to EN 558, basic series 14 (DIN 3202, F4) or according to customer conditions
  • With flange ends on both sides acc. to EN 1092-1 or according to customer con- ditions
  • Double-offset disk bearing mounted in maintenance-free bushing
  • Medium free bearing (dry shaft) in body by means of double O-ring sealing and closed disk eyes
  • Wear-resistant, corrosion-resistant and undermining-resistant seat
  • Possible to replace profile sealing ring without disassembling the disk
  • Automatic sealing system with enclosed and pressure-supported profile sealing ring
  • Tight in both flow directions acc. EN 12266, leak rate A
  • Special larger 2nd offset, designed according to customer flow conditions
  • Designed for flow velocities up to 20 m/s
  • Low flow resistance due to special disc design
  • VAG HYsec hydraulic actuator with weight and/or special hydraulic cylinder
  • O-rings: EPDM
  • Body: Welded steel S235JRG2
  • Valve sealing: EPDM
  • Disk: Welded steel 1.0038
  • Butterfly valve stem: Stainless steel 1.4021
  • Shaft bearing: Zincfree bronze
  • Seat: Stainless steel, microfinished
  • Body: Internally and externally epoxy coated
  • Disk: Epoxy coated

VAG-Group Headquarters
Carl-Reuther-Str. 1
68305 Mannheim
Phone: +49 (621) 749-0
Fax: +49 (621) 749-2156

Write e-mail

Questions about the product?

Our experts will gladly answer your questions and support you competently and reliably!

Find contact


In order to use all functions and advantages of the site, you need a user account.

Register now / Login